T-Mobile Signal Watcher manual

Version 1.1, November 2026. Idea by Jerry, made by Evie.

What's new in 1.1

To update from 1.0: close the program (the Exit button, Alt+X, in the main window, or Exit on the tray icon's menu), then copy the new "T-Mobile Signal Watcher.exe" and manual over the old ones. Your settings, names and password are kept.

What it does

T-Mobile Signal Watcher is a small Windows program for people with T-Mobile home internet. It asks your T-Mobile box, every minute or so, two things:

You pick the devices you care about. If one of them gets a weak Wi-Fi signal or drops off the Wi-Fi, the program tells you with a sound, a pop-up window and a Windows notification, whichever you choose. It also always tells you if your box loses its 5G or 4G signal, and when it gets it back.

It shows T-Mobile's signal as plain numbers, so you can read them to a T-Mobile representative, instead of the picture on T-Mobile's web page.

It also has a Box settings window. It shows your box's phone number and SIM card details. It can turn the box's Wi-Fi radios on or off, change your Wi-Fi networks' names and passwords, hide a network, and restart the box.

It was made for screen reader users and tested with NVDA. Everything works from the keyboard.

What you need

Installing

  1. Unzip the zip file into a folder of its own that you can write to, such as C:\portable\T-Mobile Signal Watcher. Don't use Program Files, because the program saves its settings in its own folder.
  2. Start "T-Mobile Signal Watcher.exe".
  3. Windows may say "Windows protected your PC", because the program is new and not signed. Choose "More info", then "Run anyway".

There's nothing else to install. To move it, move the whole folder.

The first time you start it

A window called "T-Mobile Signal Watcher router password" opens, with the cursor in the password box.

  1. Type your box's admin password. The letters show as stars. To hear them, check "Show the password" (Alt+S).
  2. Press Enter, or choose Save (Alt+V).

The main window opens, and the program checks your box right away. If the password is wrong, the Status box says so. Choose "Router password" (Alt+A) to type it again.

The main window

The controls, in Tab order:

Devices on your Wi-Fi (Alt+D)

The list. Its first two lines are your box's own signal from T-Mobile, such as:

"T-Mobile 5G signal: 5 bars, RSRP -69, SINR 19, RSRQ -10, band n41, tower 12345"

Then come your devices: first the ones on Wi-Fi, then the ones plugged in by cable ("wired"), then the ones the box remembers but that aren't connected now. A Wi-Fi device reads like:

"Den TV, -61, good, watching, weakest -66, strongest -58, 192.168.12.50"

Watch this device (Alt+W)

Check this to be warned about the device selected in the list.

Name for this device (Alt+N)

Give the selected device a name you'll recognize, such as "Den TV". The list shows the new name once you leave the box. The name stays with that device, even if your box gives it a new network address.

Some phones and watches make up a new hardware address now and then, for privacy. When that happens, they show up as a new device. TVs and Chromecasts don't do this.

Warn me when the signal is weaker than (Alt+T)

The line between good and bad, -70 to start. You can type it with or without the minus sign. Numbers from -20 to -100 work. Once a device is weak, it only counts as good again when it's 3 better than the line. That way, a device sitting right on the line doesn't warn you over and over.

Check every this many seconds (Alt+E)

How often to ask your box, 60 to start. From 10 to 3600 seconds (an hour).

Warn me when a watched device drops off the Wi-Fi (Alt+O)

Checked to start. Uncheck it if you turn a watched TV off at night and don't want to hear about it.

Play a sound (Alt+S)

Plays a sound with each warning.

Sound when a device gets bad (Alt+B) and Sound when it's good again (Alt+G)

Each has a box for a sound file, then "Pick a sound..." to choose one, then "Play it" to hear it. A .wav or .mp3 file works. Leave the box empty to use a Windows sound. If a file can't be played, the Windows sound plays instead and the Status box says why, so a warning is never silent.

Two sounds come with the program, in its folder: "bad beep.wav" (three quick high beeps) and "good beep.wav" (two notes going up).

The "bad" sound also plays when your box loses 5G or 4G, and the "good again" sound when it gets it back.

Show a pop-up window (Alt+P)

A window called "T-Mobile Signal Watcher warning" comes to the front, with the cursor on the message, such as "Den TV's Wi-Fi signal is weak (-74)." Press Escape, or Tab to OK and press Enter. A new warning that arrives while it's open is added to the same message.

Show a Windows notification (Alt+F)

A Windows notification with the same message, which NVDA reads out as it appears.

Start when Windows starts (Alt+R)

When checked, the program starts in the tray each time you sign in to Windows, and starts watching.

Status (Alt+U)

A read-only box saying when your box was last checked and how each watched device is doing, such as "Checked at 7:42 PM. Den TV: -61, good." Problems show up here too.

The buttons

The Box settings window

In the main window, press Ctrl+Comma, or choose "Box settings" (Alt+I). A window called "T-Mobile Signal Watcher box settings" opens and reads your box's settings. Unlike the main window, nothing here changes your box until you choose Save, because Wi-Fi changes knock devices offline for a moment.

Box information (Alt+I)

A read-only box you can arrow through and copy from:

Wi-Fi radios (Alt+2, Alt+5, Alt+6)

Three checkboxes: "2.4 GHz Wi-Fi radio on", "5 GHz Wi-Fi radio on" and "6 GHz Wi-Fi radio on". Unchecking one turns that radio off when you save, and everything using it loses its Wi-Fi. At least one has to stay on.

Wi-Fi networks (Alt+N)

Your box can have up to four Wi-Fi networks. Each line says the network's name, which radios it uses, and whether it's shown or hidden, such as "1. Den Wi-Fi, on 2.4, 5 and 6 GHz, shown". The box doesn't say which network each device uses. A device's own Wi-Fi settings show that.

For the network selected in the list:

About bands: 2.4 GHz reaches farthest and through more walls, but is slowest. 5 GHz is faster with less reach. 6 GHz is fastest, reaches least, and only newer devices can use it. Some older or simpler devices, like smart plugs, get confused by a network that's on several bands at once, so many people keep a separate 2.4 GHz-only network for them. If you take a band away from a network, devices using it on that band lose their Wi-Fi until you move them to another network.

Status (Alt+U)

Says when the settings were read, whether you've changed anything that isn't saved yet, and how saving went.

The buttons

This program can't block a single device, because the box it was tested with doesn't offer that. To get an unwanted device off your Wi-Fi, change that network's password, then set your own devices up again with the new one.

Saving

There's no Save button. Every change is saved the moment you make it: names, checkboxes, sounds and numbers. A number box only saves a number that makes sense. While you're halfway through typing one, the last good number is kept.

Warnings you can get

Each warning comes once, when things change, not every minute. Right after the program starts, it says nothing about 5G and 4G until it knows how things stand, so there's no false alarm.

The tray

While the program runs, its icon is in the system tray, the notification area by the clock. Its name is "T-Mobile Signal Watcher".

Closing the window with Alt+F4 also only hides it. To close the program completely, use Exit. Starting the program again while it's running brings back the window that's already open.

If you can't find the icon, Windows may have put it in the hidden icons. Press Windows+B to go to the tray, then use the arrow keys.

Reading the numbers

Wi-Fi signal of a device

Wi-Fi signal is measured in dBm, a negative number. Closer to zero is stronger. The words the program uses:

SignalWord
-55 or bettervery good
-56 to -67good
-68 to -75fair
-76 to -82weak
-83 or worsevery weak

For streaming video, -67 or better is a good rule of thumb.

Your box's 5G and 4G signal

These are the numbers T-Mobile's representatives usually ask for. Read them the whole line.

"T-Mobile 5G signal: none" means your box has no 5G connection right now. On many T-Mobile boxes, the 5G connection works together with the 4G one, so losing 4G can take 5G down with it.

Your password and privacy

If something goes wrong

Removing the program

  1. Uncheck "Start when Windows starts" (Alt+R).
  2. Choose Exit (Alt+X).
  3. Delete the program's folder.
  4. If you like, remove the saved password from Credential Manager, as described above.